Home | Contact | Mail
 
 
 
Scraped film evaporato…
Molecular distillation…
Slicer
Reacting agitator
Heat exchanger
Fermentation, extracti…
Drying, dispersing, mi…
Concentrating equipmen…
Other equipment
 
 
Add: Southern District of Wanshi Town, Yixing
Tel:0510-87885500、87840558
Technical consultation:
0510-87850838
After-sale service:
0510-87850578
Fax:0510-87840568
Web:www.wtprofit.com
E-mail:13706180307@139.com
 
 
The difference between the reaction vessel and other reaction vessels and the calculation of the cooling capacity
Publisher:Rong Yu reaction kettle  Time:2017/5/17 16:52:59  Click:1186

For the reaction kettle, first of all, to put forward a few questions, the specific is: the reactor and the reaction kettle, is it the same? Is there a corresponding formula for the cooling capacity of the reactor? And what are the problems related to the reaction kettle? Since the question has been raised, it is better to give a specific answer to it right now. I hope you can master it in time.


1. reactor and reaction kettle, is it the same?

Although the two reactors look similar, they are different from each other, which is a subsidiary relationship, that is, reactor contains reactor. Moreover, the type of the reactor, generally speaking, is the two kind of intermittent peaceful flow type, and the reaction kettle is basically intermittent.


2. is there a corresponding formula for the cooling capacity of the reactor?

The cooling capacity of reactor is calculated accordingly, so the answer is that the formula is Q=cm T.

Among them, Q is for absorbing heat, m refers to the mass of the object, and the delta T, it refers to the endothermic or exothermic, temperature rise or fall in value. So, the specific calculation can be carried out according to this formula.


3. the reaction kettle and the reaction tower in the chemical production, is there any difference? In addition, how to get the thickness of the material in the reactor jacket?

There is a difference between the reaction kettle and the reaction tower in the chemical production, and there is no doubt that it is。 Because they are different in form and working principle, but the purpose of their use is the same, and they are used for chemical reactions。 Therefore, the correct choice should be made according to the different situations and requirements。


The thickness of the material in the reactor jacket is to know some specific parameters, and then it can be calculated. In terms of specific parameters, the volume, diameter, temperature, working condition, material and media are all important. Therefore, they can not be omitted.

Prev:What does the price of different kinds of heat exchangers relate to?
Next:Comparison and application of the type of slicer
    
 
 
Copyright Wuxi Rong Yu Chemical Equipment Co., Ltd. Professional production Slicer,Spiral plate heat exchanger,Resin reaction kettle Add: Southern District of Wanshi Town, Yixing Legal person / General Manager:Zhuxiongwei  Mobile:13901510709 Tel:0510-87885500、87840558
Fax:0510-87840568 Zip code:214212 Web:www.wtprofit.com E-mail:13706180307@139.com 
彩票大赢家 网上百家乐送彩金 彩票大赢家 有什么下载送彩金的网站啊 澳客彩票 67娱乐系统 那个时时彩平台送彩金 ag娱乐平台送彩金 滚球网站送彩金 博彩论坛送彩金